- Differentiate between storage devices and storage media.
A data storage device is a device for recording (storing) information (data). Recording can be done using virtually any form of energy, spanning from manual muscle power in handwriting, to acoustic vibrations in phonographic recording, to electromagnetic energy modulating magnetic tape and optical discs.
A storage device may hold information, process information, or both. A device that only holds information is a recording medium. Devices that process information (data storage equipment) may either access a separate portable (removable) recording medium or a permanent component to store or retrieve information.
While, a storage medium is any technology (including devices and materials) used to place, keep, and retrieve data. A medium is an element used in communicating a message; on a storage medium, the "messages" - in the form of data - are suspended for use when needed. The plural form of this term is storage media. Although the term storage includes both primary storage (memory), a storage medium usually means a place to hold secondary storage such as that on a hard disk or tape.
- Identify the uses of tape, magnetic stripe cards, smart cards, microfilm and microfiche, and enterprise storage.
A tape drive is a data storage device that reads and writes data on a magnetic tape. It is typically used for offline, archival data storage. Tape media generally has a favorable unit cost and long archival stability.
A tape drive provides sequential access storage, unlike a disk drive, which provides random access storage. A disk drive can move its read/write head(s) to any random part of the disk in a very short amount of time, but a tape drive must spend a considerable amount of time winding tape between reels to read any one particular piece of data. As a result, tape drives have very slow average seek times. Despite the slow seek time; tape drives can stream data to and from tape very quickly. For example, popular Linear Tape-Open drives can reach, as of 2010, continuous data transfer rates of up to 140 MB/s, which is comparable to hard disk drives.
A magnetic stripe card is a type of card capable of storing data by modifying the magnetism of tiny iron-based magnetic particles on a band of magnetic material on the card. The magnetic stripe, sometimes called swipe card or magstripe, is read by physical contact and swiping past a magnetic reading head.
Invented by IBM in 1960 under a contract with the US government for a security system, a number of International Organization for Standardization standards, ISO/IEC 7810, ISO/IEC 7811, ISO/IEC 7812, ISO/IEC 7813, ISO 8583, and ISO/IEC 4909, now define the physical properties of the card, including size, flexibility, location of the magstripe, magnetic characteristics, and data formats. They also provide the standards for financial cards, including the allocation of card number ranges to different card issuing institutions.
A smart card, chip card, or integrated circuit card (ICC), is any pocket-sized card with embedded integrated circuits. A smart card or microprocessor cards contain volatile memory and microprocessor components. The card is made of plastic, generally polyvinyl chloride, but sometimes acrylonitrile butadiene styrene or polycarbonate . Smart cards may also provide strong security authentication for single sign-on (SSO) within large organizations.
Microforms are any forms, either films or paper, containing microreproductions[1] of documents for transmission, storage, reading, and printing. Microform images are commonly reduced to about one twenty-fifth of the original document size. For special purposes, greater optical reductions may be used.
All microform images may be provided as positives or negatives, more often the latter.
Three formats are common: microfilm (reels), aperture cards and microfiche (flat sheets). Microcards, a format no longer produced, was similar to microfiche, but printed on cardboard rather than photographic film.
In computing, enterprise storage is the computer storage designed for large-scale, high-technology environments of the modern enterprises. When comparing to the consumer storage, it has higher scalability, higher reliability, better fault tolerance, and much higher initial price.
- Describe the various types of flash memory storage: solid state drives, memory cards, USB flash drives, and ExpressCard modules.
A solid-state drive (SSD) is a data storage device that uses solid-state memory to store persistent data with the intention of providing access in the same manner of a traditional block i/o hard disk drive. SSDs are distinguished from traditional hard disk drives (HDDs), which are electromechanical devices containing spinning disks and movable read/write heads.
A memory card or flash card is an electronic flash memory data storage device used for storing digital information. They are commonly used in many electronic devices, including digital cameras, mobile phones, laptop computers, MP3 players, and video game consoles. They are small, re-recordable, and able to retain data without power.
A USB flash drive consists of a flash memory data storage device integrated with a USB (Universal Serial Bus) interface. USB flash drives are typically removable and rewritable, and physically much smaller than a floppy disk.
ExpressCard is an interface to allow peripheral devices to be connected to a computer, usually a laptop computer. Formerly called NEWCARD, the ExpressCard standard specifies the design of slots built into the computer and of cards which can be inserted into ExpressCard slots. The cards contain electronic circuitry and connectors to which external devices can be connected. The ExpressCard standard replaces the PC Card (also known as PCMCIA) standards.
- Differentiate among various types of optical discs: CDs, archive discs and Picture CDs, DVDs, and Blu-ray Discs.
The Compact Disc (also known as a CD) is an optical disc used to store digital data. It was originally developed to store and playback sound recordings exclusively, but later expanded to encompass data storage (CD-ROM), write-once audio and data storage (CD-R), rewritable media (CD-RW), Video Compact Discs (VCD), Super Video Compact Discs (SVCD), PhotoCD, PictureCD, CD-i, and Enhanced CD. Audio CDs and audio CD players have been commercially available since October 1982.
Picture CD is a product by Kodak, following on from the earlier Photo CD product. It holds photos from a single roll of color film, stored at 1024×1536 resolution using JPEG compression. The product is aimed at consumers. Software to view and perform simple edits to images is included on the CD.
DVD is an optical disc storage media format, invented and developed by Philips, Sony, Toshiba, and Panasonic in 1995. DVDs offer higher storage capacity than compact discs while having the same dimensions.
Blu-ray Disc (official abbreviation BD) is an optical disc storage medium designed to supersede the DVD format. The disc diameter is 120 mm and disc thickness 1.2 mm plastic optical disc, the same size as DVDs and CDs. Blu-ray Discs contain 25 GB (23.31 GiB) per layer, with dual layer discs (50 GB), the norm for feature-length video discs. Triple layer discs (100 GB) and quadruple layers (128 GB) are available for BD-XL Blu-ray re-writer drives. Currently movie production companies have not utilized the triple or quadruple layer discs, most consumers owned Blu-ray players will not be able to read the additional layers, while newer Blu-ray players may require a firmware update to play the triple and quadruple sized discs.
- Summarize the characteristics of ink-jet printers, photo printers, laser printers, multifunction peripherals, thermal printers, mobile printers, label and postage printers, and plotters and large-format printers.
An inkjet printer is a type of computer printer that creates a digital image by propelling droplets of ink onto paper. Inkjet printers are the most commonly used type of printer and range from small inexpensive consumer models to very large professional machines that can cost up to thousands of dollars.
A laser printer is a common type of computer printer that rapidly produces high quality text and graphics on plain paper. As with digital photocopiers and multifunction printers (MFPs), laser printers employ a xerographic printing process, but differ from analog photocopiers in that the image is produced by the direct scanning of a laser beam across the printer's photoreceptor.
An MFP (Multi Function Product/ Printer/ Peripheral), multifunctional, all-in-one (AIO), or Multifunction Device (MFD), is an office machine which incorporates the functionality of multiple devices in one, so as to have a smaller footprint in a home or small business setting (the SOHO market segment), or to provide centralized document management/distribution/production in a large-office setting.
A thermal printer (or direct thermal printer) produces a printed image by selectively heating coated thermochromic paper, or thermal paper as it is commonly known, when the paper passes over the thermal print head. The coating turns black in the areas where it is heated, producing an image. Two-color direct thermal printers can print both black and an additional color (often red) by applying heat at two different temperatures.
No comments:
Post a Comment